V-belt Movendis PP-XPA2882-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPA2882-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPA2882-EPDM-AS and any equivalents.
The Movendis PP-XPA2882-EPDM-AS is a cogged narrow V-belt in the XPA profile with a length of 2882 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. This page is written for maintenance and purchasing teams who need to match a belt to the one being replaced.
Start by reading the marking on the back of the belt you are removing. You are looking for the profile and the length: XPA and 2882 mm. If those two values match the Movendis PP-XPA2882-EPDM-AS, the belt is the same size. Confirm the belt is a cogged narrow V-belt, not a wrapped or banded construction, before you order.
A cogged narrow V-belt is used on drives where a standard narrow V-belt may run hot or slip. The raw edge and cogged construction are typical of this series. Check the pulley grooves for wear, oil or debris while the belt is off, and make sure the sheaves are aligned before the new belt is fitted.
If the old belt is unmarked or the marking has worn off, measure the outside length and compare it with the 2882 mm figure. Send the part number, the profile and the length to our team by WhatsApp or email. We carry the Movendis PP-XPA2882-EPDM-AS and can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- XPA
- Length
- 2882mm
Frequently asked questions
- How do I confirm this is the correct replacement belt?
- Check the marking on the back of the belt being replaced. The profile should read XPA and the length should read 2882 mm. If both match, the Movendis PP-XPA2882-EPDM-AS is the same size. If the marking is unreadable, measure the outside length and send it to us with the part number.
- What details should I send for a quote?
- Send the part number PP-XPA2882-EPDM-AS, the profile XPA and the length 2882 mm. If you are replacing a different brand, include the marking from the old belt. Our team replies by WhatsApp or email and can confirm the belt or suggest an equivalent.
- Can you help if I only have the old belt and no part number?
- Yes. Send a photo of the back of the belt and the measured length. We will check the profile and length against the Movendis PP-XPA2882-EPDM-AS and let you know if it matches or if another belt in our range is the right fit.