V-belt Movendis PP-XPA2360-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPA2360-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPA2360-EPDM-AS and any equivalents.
The Movendis PP-XPA2360-EPDM-AS is a cogged narrow V-belt in the XPA profile with a length of 2360 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. Use the marking on the belt you are replacing to confirm the profile and length before you order.
To match this belt to the one being replaced, read the back of the old belt. Look for the profile, XPA, and the length, 2360 mm. If the old marking matches both, the PP-XPA2360-EPDM-AS is the correct reference. Do not rely on a measured outside length alone; the profile and the length code on the belt are what identify it.
If the marking is worn or unreadable, check the drive documentation or the pulley groove width to confirm the profile. A belt with the same length but a different profile will not seat correctly in the grooves. When you contact us, send the part number PP-XPA2360-EPDM-AS, or the profile and length from the old belt, and we will confirm the match.
Cogged narrow V-belts are used on industrial drives where a compact cross-section is required. This belt is built in EPDM and has a raw edge construction, as stated in the series name. Inspect the drive for worn pulleys, misalignment or damaged grooves before fitting a replacement.
Dimensions
- Section
- XPA
- Length
- 2360mm
Frequently asked questions
- How do I confirm the PP-XPA2360-EPDM-AS is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. If it shows the XPA profile and a 2360 mm length, this belt matches. If the marking is not clear, send us the profile and length from the old belt or the drive documentation.
- What should I send to request a quote?
- Send the part number PP-XPA2360-EPDM-AS, or the profile and length from the belt being replaced. If you have the old belt, a photo of the back marking helps us confirm the match.
- Can I replace a belt of the same length but a different profile with this one?
- No. The profile must match the pulley grooves. A belt of the same length but a different profile will not seat correctly. Confirm both the profile and the length before ordering.