V-belt Movendis PP-XPA2057-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPA2057-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPA2057-EPDM-AS and any equivalents.
The Movendis PP-XPA2057-EPDM-AS is a cogged narrow V-belt in the XPA profile with a length of 2057 mm. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly. MR Industrial Accessories supplies this belt to maintenance, engineering and purchasing teams across the US, Canada, Mexico and South America.
Start with the sheaves. Check groove wear, cracks, burrs and any buildup of debris or oil. Worn or damaged grooves can shorten belt life and cause noise or slip even when the belt itself is correct. Confirm that the sheaves are aligned and that the drive turns freely by hand before you install the new belt.
The PP-XPA2057-EPDM-AS is a cogged narrow V-belt from the Movendis PowerPlus EPDM Cogged Raw Edge Narrow series. Its profile is XPA and its length is 2057 mm. Use those two values to match the belt to the drive. If you are replacing an existing belt, read the marking on the back of the old belt and compare it with the part number and profile before ordering.
When you request a quote, send the part number PP-XPA2057-EPDM-AS, the profile XPA and the length 2057 mm. If the old belt marking is worn or unreadable, include photos of the drive and sheaves so the team can help confirm the right belt. MR replies promptly by WhatsApp or email.
Dimensions
- Section
- XPA
- Length
- 2057mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheaves for wear, cracks, burrs and contamination, confirm alignment, and make sure the drive turns freely by hand. Correcting sheave problems first helps the new belt seat and run properly.
- How do I confirm the PP-XPA2057-EPDM-AS is the right belt?
- Match the profile XPA and the length 2057 mm to your drive. If you are replacing an existing belt, compare those values with the marking on the back of the old belt.
- What information should I send with my quote request?
- Send the part number PP-XPA2057-EPDM-AS, the profile XPA and the length 2057 mm. If the old belt marking is unreadable, include photos of the drive and sheaves so the team can help confirm the right belt.