V-belt Movendis PP-XPA1750-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPA1750-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPA1750-EPDM-AS and any equivalents.
The Movendis PP-XPA1750-EPDM-AS is a cogged narrow V-belt in the XPA profile with a length of 1750 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. Before fitting this belt, inspect the drive and sheaves so the new belt runs true and wears evenly.
A new belt cannot correct a worn or misaligned drive. Check sheave grooves for wear, rust, or embedded debris, and confirm that the sheaves are aligned and securely mounted. Worn grooves can cause a correctly sized belt to sit too deep, slip, and overheat. If the old belt failed early, the sheaves or tensioning system are the first things to examine.
This Movendis belt is a cogged narrow V-belt with an XPA profile and a 1750 mm length. The raw edge and cogged construction are part of the PowerPlus EPDM Cogged Raw Edge Narrow series. When you replace a belt on a multi-belt drive, fit a complete set of belts from the same series and part number so the load is shared evenly.
To request a quote, send the part number PP-XPA1750-EPDM-AS by WhatsApp or email. If you are unsure whether this XPA profile and 1750 mm length match your drive, include the old belt marking and the sheave dimensions. We carry Movendis belts and can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- XPA
- Length
- 1750mm
Frequently asked questions
- What should I check before installing the PP-XPA1750-EPDM-AS?
- Inspect the sheaves for groove wear, rust, and debris, and verify that they are aligned. Also check the tensioner and any worn drive components. Correcting these first helps the new belt seat and run properly.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace all belts in the drive as a set. Belts from the same series and part number will share the load evenly. Mixing a new belt with old ones can cause the new belt to carry more than its share.
- How do I request a quote for this belt?
- Send the part number PP-XPA1750-EPDM-AS by WhatsApp or email. If you need help confirming the profile or length, include the marking on the old belt and the sheave dimensions.