V-belt Movendis PP-XPA1400-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPA1400-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPA1400-EPDM-AS and any equivalents.
When a drive belt needs replacing, the fastest way to identify the correct part is to read the marking on the back of the old belt. This page covers the Movendis PP-XPA1400-EPDM-AS, a cogged narrow V-belt in the XPA profile with a 1400 mm length, from the PowerPlus EPDM Cogged Raw Edge Narrow series.
The marking on a belt back typically shows the profile and the length, which is what you need to match. Here, the profile is XPA and the length is 1400 mm. This belt is a cogged narrow V-belt, also called a wedge belt, and the raw edge construction is part of the PowerPlus EPDM series from Movendis.
If the old belt is worn or the marking is unreadable, check the drive for other clues. The sheave groove width and the center distance between pulleys can help confirm the XPA profile and the 1400 mm length. A cogged narrow V-belt like this one is used where space is limited and the drive runs at higher speeds than a classical V-belt drive.
To request a quote, send the part number PP-XPA1400-EPDM-AS by WhatsApp or email. If you are replacing more than one belt on the same drive, include the quantity and any other markings from the old belts so the team can confirm the correct replacement. They can also help verify the right belt or suggest an equivalent if the exact part is not what you need.
Dimensions
- Section
- XPA
- Length
- 1400mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt. It should show the profile and length. This belt is XPA profile and 1400 mm long. If the marking is missing, measure the top width and the outside length of the old belt and send those dimensions with your request.
- What does the part number PP-XPA1400-EPDM-AS tell me?
- It identifies a Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt in the XPA profile with a 1400 mm length. Use this full part number when requesting a quote so the team can match it exactly.
- Can I replace just one belt on a multi-belt drive?
- On drives that use multiple belts, it is common practice to replace all belts at the same time so they wear evenly. Send the quantity you need along with the part number, and the team can help you confirm the correct set.