Skip to main content
All products
Movendis logo · MOVENDIS PP-SPZ3150
V-belt Movendis PP-SPZ3150

MOVENDISBrand We Carry

V-belt Movendis PP-SPZ3150

Manufacturer part numberPP-SPZ3150Also known as: PPSPZ3150 · PP SPZ3150
Subcategory
V-belts
Section
SPZ
Series
PowerPlus Narrow Wedge V-Belts
Get a quote for PP-SPZ3150 on WhatsApp

We reply promptly.

Tell us the quantity you need and request a quote by WhatsApp or email.

Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.

Ask on WhatsAppAsk by email

Description

MOVENDIS PP-SPZ3150 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPZ3150 and any equivalents.

The Movendis PP-SPZ3150 is a narrow wedge V-belt in the PowerPlus series, with an SPZ profile and a length of 3150 mm. Before you fit it, inspect the drive and sheaves so the new belt seats and runs correctly.

Check sheave grooves for wear, burrs, and embedded debris. Worn or damaged grooves can prevent the 9.7 mm top width and 40-degree angle from seating properly, which leads to slip and short belt life. Confirm the sheaves are aligned and the shafts turn freely.

Verify the old belt marking and measure its length against the 3150 mm figure. Match the SPZ profile and the 8 mm height to the drive. If the old belt is stretched or damaged, replace it and inspect the other belts on the drive at the same time.

When you request a quote, send the part number PP-SPZ3150 and the belt marking. Our team replies promptly and can confirm the right belt or suggest an equivalent.

Dimensions

Section
SPZ
Length
3150mm

Frequently asked questions

What should I check on the drive before installing this belt?
Inspect sheave grooves for wear, burrs, and debris; confirm alignment and free rotation. Worn grooves can prevent the SPZ profile from seating correctly.
How do I confirm this is the correct belt for my drive?
Check the old belt marking for the SPZ profile and compare its length to 3150 mm. Also verify the 9.7 mm top width and 8 mm height.
What information should I send with my quote request?
Send the part number PP-SPZ3150 and the marking from the old belt. Our team will confirm the belt or suggest an equivalent.
Get a quote for PP-SPZ3150 on WhatsApp
Quote on WhatsApp