V-belt Movendis PP-SPZ2240
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPZ2240 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPZ2240 and any equivalents.
The Movendis PP-SPZ2240 is a narrow wedge V-belt in the PowerPlus series. It has an SPZ profile, a 2240 mm length, a 9.7 mm top width, an 8 mm height and a 40 degree angle. Before you fit it, check the drive and sheaves.
A new belt will not correct a worn drive. Inspect sheave grooves for wear, cracks, or embedded debris, and confirm the sheaves are aligned and free of oil or grease. Check the bearings and the tensioning device, and verify that the sheave groove angle and width suit an SPZ profile belt. If the old belt failed early, the drive condition is the first thing to review.
Record the marking on the back of the old belt before you remove it. The PP-SPZ2240 is identified by its SPZ profile and 2240 mm length, along with its 9.7 mm top width, 8 mm height and 40 degree angle. When you request a quote, send the part number and the belt marking so we can confirm the correct belt for your drive.
On drives that use multiple belts, replace the full set at the same time. Mixing a new belt with used belts can leave the new belt carrying more load, and it may not seat correctly in worn sheaves. After fitting, recheck alignment and tension following your standard procedure.
Dimensions
- Section
- SPZ
- Length
- 2240mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, cracks, or debris, confirm alignment, and check bearings and the tensioning device. Verify the sheave groove is suited to an SPZ profile belt.
- How do I identify the belt I need to replace?
- Read the marking on the back of the old belt. The PP-SPZ2240 has an SPZ profile and a 2240 mm length, with a 9.7 mm top width, an 8 mm height and a 40 degree angle.
- What information should I send with my quote request?
- Send the part number, PP-SPZ2240, and the marking from the old belt. If you have several belts on the drive, note that as well so we can help confirm the right belt.