V-belt Movendis PP-SPZ1900
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPZ1900 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPZ1900 and any equivalents.
This Movendis PowerPlus narrow wedge V-belt carries the part number PP-SPZ1900. It has an SPZ profile and a length of 1900 mm. The 40-degree angle, 9.7 mm top width and 8 mm height define its cross-section for your drive.
For a maintenance or purchasing professional, the marking on the belt back is the fastest way to confirm what you need. PP-SPZ1900 tells you the profile is SPZ and the length is 1900 mm. The 9.7 mm top width and 8 mm height are consistent with that profile, so you can compare against the old belt before ordering.
When you request a quote, send the part number PP-SPZ1900 and the quantity. If you are replacing a belt on a drive that uses several belts, note that the profile and length must match across the set. The 40-degree angle is part of the SPZ profile and is not adjustable on the drive.
We carry the Movendis PowerPlus line and can help confirm this narrow wedge V-belt fits your application. If you need to verify the profile or length, send a photo of the belt marking or the drive nameplate. Our team replies by WhatsApp or email with the information you need to complete the order.
Dimensions
- Section
- SPZ
- Length
- 1900mm
Frequently asked questions
- What do the profile and length mean on the PP-SPZ1900?
- The profile is SPZ, which sets the cross-section: 9.7 mm top width, 8 mm height and a 40-degree angle. The length is 1900 mm. Both values must match the drive and the old belt for proper fit.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt for SPZ and 1900 mm. If the marking is worn, measure the top width and height, or send a photo of the belt and the drive nameplate. We can help you confirm the profile and length.
- Can I replace just one belt in a multi-belt drive?
- For drives that use multiple belts, replace the full set at the same time so the belts share the load evenly. All belts in the set should have the same profile and length, such as SPZ and 1900 mm.