V-belt Movendis PP-SPB2360
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPB2360 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPB2360 and any equivalents.
The Movendis PP-SPB2360 is a narrow wedge V-belt in the PowerPlus line with an SPB profile and a 2360 mm length. If you are replacing a belt on an existing drive, the fastest way to confirm the right part is to read the marking on the back of the old belt and compare it against this listing.
Check the profile and the length first. This belt is SPB profile at 2360 mm, with a top width of 16.3 mm, a height of 13 mm and a 40 degree angle. The SPB profile and the 2360 mm length are the two values that decide whether it fits your pulleys and your center distance. If your old belt carries SPB and 2360, this is the same size.
When the old belt is worn or the marking is gone, measure it before you order. A belt that has run for a long time can stretch, so a tape measurement across the outside can read longer than the original length. Where a drive uses more than one belt, replace the full set at once so the belts share the load evenly.
Send us the part number from the back of the belt, or the profile and length you measured, by WhatsApp or email. We carry the Movendis PowerPlus range and can confirm the PP-SPB2360 or suggest an equivalent for your drive.
Dimensions
- Section
- SPB
- Length
- 2360mm
Frequently asked questions
- How do I know the PP-SPB2360 is the belt I need?
- Read the marking on the back of the belt you are replacing. If it shows SPB and 2360, this belt matches that profile and length. The top width is 16.3 mm, the height is 13 mm and the angle is 40 degrees.
- What should I send for a quote?
- Send the part number PP-SPB2360, or the profile and length from the old belt, by WhatsApp or email. Photos of the marking and the drive help us confirm the match.
- Should I replace all the belts on the drive at once?
- On a drive that runs more than one belt, replace the full set together. Belts of different wear or age can load unevenly, and matching the set keeps the drive running as designed.