V-belt Movendis PP-SPA3382
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPA3382 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPA3382 and any equivalents.
The Movendis PP-SPA3382 is a narrow wedge V-belt in the SPA profile, part of the PowerPlus series. It measures 3382 mm in length, with a 12.7 mm top width, 10 mm height and a 40-degree angle. This belt is used in industrial drives where a compact, high-capacity V-belt is required.
Narrow wedge V-belts like the SPA profile are common on pumps, fans, compressors and other driven equipment in plants and process lines. The SPA profile is a metric narrow section, and the 3382 mm length suits drives with longer center distances. Because the belt runs in a matched groove, correct profile and length are essential for proper fit and power transmission.
To confirm fit, check the old belt's back marking for the profile and length, or measure the outside length and top width with a caliper. Compare these against the SPA profile and 3382 mm length of the PP-SPA3382. Also inspect the pulley grooves for wear and verify the drive's required number of belts. If the marking is unreadable, send a photo and the drive details for help identifying the correct belt.
When replacing a narrow wedge V-belt, it is good practice to inspect all belts on the drive and replace them as a set if they show wear or elongation. Check pulley alignment and tension after installation to avoid premature failure. For a quote on the Movendis PP-SPA3382, send the part number and quantity by WhatsApp or email.
Dimensions
- Section
- SPA
- Length
- 3382mm
Frequently asked questions
- How do I confirm the PP-SPA3382 is the right belt for my drive?
- Check the marking on the back of the old belt for the SPA profile and 3382 mm length. If it matches, the PP-SPA3382 is the correct replacement. You can also measure the top width (12.7 mm) and outside length to compare.
- What should I send to request a quote?
- Send the part number PP-SPA3382 and the quantity you need by WhatsApp or email. If you are unsure about the fit, include a photo of the old belt's marking and the drive details.
- Can I replace just one belt on a multi-belt drive?
- It is recommended to replace all belts on a drive as a set if they show signs of wear or elongation. Mixing new and worn belts can cause uneven tension and reduce drive life.