V-belt Movendis PP-SPA3182
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPA3182 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPA3182 and any equivalents.
This Movendis PowerPlus narrow wedge V-belt, part number PP-SPA3182, is built to the SPA profile with a 3182 mm length. It measures 12.7 mm across the top, 10 mm high and has a 40° angle. Use these figures to match it against the belt you are replacing.
Start by reading the marking on the back of the old belt. If it shows an SPA profile and a 3182 mm length, this belt matches those two critical dimensions. Confirm the top width of 12.7 mm and the height of 10 mm as well, since a belt that seats differently in the pulley groove will not transmit load correctly.
The 40° angle is the included angle of the belt cross-section. Check that the pulley grooves are not worn or polished; a worn groove can let a new belt sit too deep and slip. If the drive runs multiple belts, replace the full set at the same time so the load is shared evenly.
When you request a quote, send the part number PP-SPA3182 along with the profile and length from the old belt. If the marking is worn away, measure the outside length and the top width, and note the drive arrangement. We carry the Movendis PowerPlus line and can confirm the correct narrow wedge V-belt for your application.
Dimensions
- Section
- SPA
- Length
- 3182mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the old belt for an SPA profile and a 3182 mm length. Also compare the 12.7 mm top width and 10 mm height. If those match, PP-SPA3182 is the correct size.
- What should I send to get a quote for this belt?
- Send the part number PP-SPA3182, or the profile and length from the old belt. If the marking is unreadable, provide the measured outside length and top width.
- Should I replace all belts on the drive at once?
- Yes. On a multi-belt drive, replace the full set so each belt carries its share of the load. Mixing a new belt with worn ones can cause the new belt to take more load and fail early.