V-belt Movendis PP-SPA2847
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPA2847 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPA2847 and any equivalents.
The Movendis PP-SPA2847 is a narrow wedge V-belt in the SPA profile with a 2847 mm length. When a drive is down, the fastest way to confirm the replacement is to match the marking on the old belt to these dimensions. We carry this belt and quote it by part number.
Matching starts with the belt you are replacing. Read the profile and length from the back of the old belt and compare them to the SPA profile and 2847 mm length of the PP-SPA2847. The cross-section is 12.7 mm at the top, 10 mm high, with a 40° angle. If the old marking is worn or unreadable, measure the outside length and check the top width and height before ordering.
A narrow wedge V-belt runs in the same groove shape as the belt it replaces, so profile and length are the two dimensions that matter most. Confirm that the drive uses an SPA section and that the 2847 mm length matches the routing. If the belt has been run in a set, replace the full set so the drive pulls evenly.
Send the part number PP-SPA2847 by WhatsApp or email to request a quote. If you are unsure between this belt and another, include the old belt marking, the profile, and the length, and the team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPA
- Length
- 2847mm
Frequently asked questions
- How do I confirm the PP-SPA2847 matches the belt I am replacing?
- Check the marking on the back of the old belt for the SPA profile and the 2847 mm length. Also compare the cross-section: 12.7 mm top width, 10 mm height, and a 40° angle. If the marking is not readable, measure the old belt and send those dimensions for confirmation.
- What should I send to get a quote for this belt?
- Send the part number PP-SPA2847 by WhatsApp or email. If you want us to confirm it against your application, include the old belt marking or the profile and length you measured.
- Should I replace the whole set at once?
- If the drive uses multiple belts, replacing the full set at the same time helps maintain even tension and load sharing. Order the number of belts the drive requires.