V-belt Movendis PP-SPA2607
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPA2607 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPA2607 and any equivalents.
The Movendis PP-SPA2607 is a narrow wedge V-belt in the PowerPlus series. It has an SPA profile, a 2607 mm length, a 12.7 mm top width, a 10 mm height and a 40° angle. We carry it for maintenance, engineering and purchasing teams who need to match an existing drive belt by marking and dimensions.
To match this belt to the one being replaced, read the marking on the back of the old belt. If it shows an SPA profile and a 2607 mm length, the PP-SPA2607 is the correct profile and length. Confirm the top width of 12.7 mm and the height of 10 mm against the old belt or the pulley groove, and check that the 40° angle matches the sheave.
If the old marking is worn or missing, measure the outside length and compare it with the 2607 mm length. Measure the top width and height with a caliper. A belt that is too wide or too narrow will not sit correctly in the groove, so the SPA profile, 12.7 mm top width, 10 mm height and 40° angle all need to agree with the drive.
Send us the part number PP-SPA2607, or the marking from the old belt, by WhatsApp or email. Our team will confirm the belt and help you identify the correct replacement. If you are replacing a set, include the quantity and the drive position so we can check the order.
Dimensions
- Section
- SPA
- Length
- 2607mm
Frequently asked questions
- How do I confirm the PP-SPA2607 matches my old belt?
- Compare the marking on the back of the old belt with the PP-SPA2607. The profile must be SPA, the length must be 2607 mm, the top width must be 12.7 mm, the height must be 10 mm and the angle must be 40°.
- What measurements should I send for a quote?
- Send the part number PP-SPA2607, or the full marking from the old belt, along with the quantity. If the marking is not readable, send the length, top width, height and angle.
- Can you help if the old belt marking is unreadable?
- Yes. Send the drive details and any measurements you can take. We will help confirm the correct narrow wedge V-belt for the application.