V-belt Movendis PP-SPA2307
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPA2307 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPA2307 and any equivalents.
The Movendis PP-SPA2307 is a narrow wedge V-belt from the PowerPlus line. It is built for industrial drives where an SPA profile and a 2307 mm length are required. This belt is commonly used on fans, pumps, compressors and other driven equipment in plants and shops.
To confirm fit, check the drive for an SPA profile and a 2307 mm belt length. The belt has a 12.7 mm top width, 10 mm height and a 40° angle. These dimensions match the SPA cross-section, so it seats correctly in the pulley groove. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 2307 mm.
Narrow wedge V-belts like this one transmit power in a smaller cross-section than classic V-belts. They are used on drives that need a compact profile and reliable grip. When replacing, inspect the pulleys for wear and alignment. If the drive uses multiple belts, replace them as a set so the load stays even across all belts.
Dimensions
- Section
- SPA
- Length
- 2307mm
Frequently asked questions
- What does the marking PP-SPA2307 tell me?
- The marking identifies the belt as a Movendis PowerPlus narrow wedge V-belt with an SPA profile and a 2307 mm length. Use the profile and length to match the drive requirements.
- How do I confirm this belt fits my drive?
- Check that the pulley grooves are SPA profile and that the required belt length is 2307 mm. The belt has a 12.7 mm top width, 10 mm height and 40° angle. If you are unsure, send the part number and a photo of the drive marking for confirmation.
- Can I replace just one belt on a multi-belt drive?
- On drives that use more than one belt, it is good practice to replace all belts at the same time. This keeps tension and load distribution even and helps avoid premature wear on the new belt.