V-belt Movendis PP-SPA1582
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPA1582 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPA1582 and any equivalents.
The Movendis PP-SPA1582 is a narrow wedge V-belt in the PowerPlus series, built to the SPA profile. We carry it for industrial drives where a compact, high-grip belt section is required. Confirm fit by matching the profile and the marked length to your drive.
Narrow wedge V-belts are common on industrial machinery, pumps, fans, compressors and similar drives that run at higher speeds and tighter pulley widths than a classic V-belt. The SPA section transmits load through a deeper, narrower cross-section, so it seats differently in the pulley groove. This belt measures 1582 mm in length, 12.7 mm across the top, 10 mm in height and a 40 degree angle.
The most reliable way to confirm the right belt is to read the marking on the back of the old one. If it shows SPA and 1582, the PP-SPA1582 matches that profile and length. Compare the top width and height against the belt you are removing as well, since a worn or stretched belt can measure short of its original length. If the marking is unreadable, measure the outside length and the cross-section, then send those figures to us.
Send the part number, the profile and the length by WhatsApp or email and our team will quote the belt and help confirm it is the correct one for your drive. If you are replacing several belts on the same drive, list them together so we can check them as a set.
Dimensions
- Section
- SPA
- Length
- 1582mm
Frequently asked questions
- How do I confirm the PP-SPA1582 fits my drive?
- Check that your drive uses an SPA section belt and that the old belt is marked 1582 mm. Confirm the top width of 12.7 mm and the height of 10 mm against the belt you are removing. If the marking is worn off, send us the measured profile and length and we will help confirm.
- What does the SPA profile mean for the pulley groove?
- SPA is a narrow wedge section with a 40 degree angle, 12.7 mm top width and 10 mm height. It seats in a pulley groove cut for that section, so the groove must match the profile for the belt to run correctly.
- What should I send to get a quote?
- Send the part number PP-SPA1582, or the profile and length if you are working from the old belt. If you are replacing more than one belt on the same drive, include the full list so we can check them together.