V-belt Movendis PP-SPA1457
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPA1457 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPA1457 and any equivalents.
The Movendis PP-SPA1457 is a narrow wedge V-belt in the PowerPlus series, built to the SPA profile. It measures 1457 mm in length, with a 12.7 mm top width, 10 mm height and a 40° angle. This page covers how to match it against the belt you are replacing and what to send for a quote.
To match the belt on your drive, read the marking on the back of the old belt first. Confirm the profile is SPA and the length is 1457 mm. Then measure the old belt's top width and height and compare them with the 12.7 mm and 10 mm figures here. The 40° angle is part of the SPA profile, so a belt marked SPA at 1457 mm is the direct match.
If the back of the belt is worn or the marking is unreadable, measure the outside length of the old belt and check the drive sheave groove. An SPA groove accepts a 12.7 mm top width and 10 mm height belt. A belt with the same length but a different profile will not seat correctly, so confirm both dimensions before ordering.
When you request a quote, send the part number PP-SPA1457 and the marking from the old belt. If the old belt is a different profile or length, we can help confirm the right belt. Replacing belts on a multi-belt drive as a set keeps the load even across the grooves.
Dimensions
- Section
- SPA
- Length
- 1457mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the old belt's back marking for SPA and 1457 mm. Then compare its top width and height with the 12.7 mm and 10 mm dimensions of the PP-SPA1457. If both match, it is the same size.
- What should I send to request a quote?
- Send the part number PP-SPA1457 and the marking from the belt you are replacing. If the marking is unreadable, send the measured length and the profile from the drive sheave.
- Should I replace all belts on the drive at once?
- On a drive that uses more than one belt, replacing them as a set keeps the load shared evenly. A new belt matched with worn belts can carry more than its share.