V-belt Movendis PP-CX91-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX91-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX91-EPDM-AS and any equivalents.
The Movendis PP-CX91-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 2367 mm. The profile sets the cross-section that has to seat correctly in the pulley groove, and the length sets the center distance the drive can cover. Read both off the old belt before you order.
The CX profile is the classical cross-section this belt is built to, and 2367 mm is the datum length Movendis lists for the part. On a classical drive, a belt that is too narrow sits low in the groove and slips; one that is too wide rides on top of the groove and never grips the flanks. Confirm the profile against the pulley, not just against the old belt number.
The cogged raw edge construction is what the series name describes: the molded teeth on the underside let the belt flex over smaller pulleys than a plain wrapped classical belt of the same section. That matters on compact drives where the belt has to bend sharply and still carry the load. The EPDM compound is the backing material specified for this series.
If the marking on the back of the old belt is worn or unreadable, send the drive details instead: pulley diameters, the center distance, the number of grooves and the width of the belt. We carry Movendis and can confirm the CX profile and 2367 mm length against your application before you commit to the order.
Dimensions
- Section
- CX
- Length
- 2367mm
Frequently asked questions
- What does the CX profile mean on this belt?
- CX is the classical cross-section the belt is built to. It has to match the pulley groove so the belt seats on the flanks rather than bottoming out or riding high. Check the pulley section as well as the old belt before ordering.
- How do I confirm 2367 mm is the right length?
- Measure the old belt or read the length marking on its back and compare it with 2367 mm. If the marking is gone, send us the pulley diameters and the center distance and we can check the length against the drive.
- What should I send to get a quote?
- Send the part number PP-CX91-EPDM-AS, the quantity, and the drive details if you have them: pulley diameters, center distance and number of grooves. We reply by WhatsApp or email and can confirm the CX profile and 2367 mm length.