V-belt Movendis PP-CX75,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX75,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX75,5-EPDM-AS and any equivalents.
The Movendis PP-CX75,5-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 1974 mm, part of the PowerPlus EPDM Cogged Raw Edge Classical series. When you pull a worn belt off a drive, the marking on its back is the fastest way to identify what to replace. Read that marking and send it to us, and we will quote the belt against it.
A back-of-belt marking usually carries the profile and the length together, which is why the CX profile and the 1974 mm length on this belt are the two figures to check first. A CX profile belt will not sit correctly in a pulley groove cut for another profile, and a belt of a different length will not tension properly even if the cross-section looks right. Match both figures to the old belt before ordering.
Cogged raw edge construction is common on compact drives where the belt bends around small pulleys, and the cogged underside is what allows that tighter wrap. Inspect the pulleys at the same time you read the marking: worn groove flanks and debris in the grooves will shorten the life of any replacement belt. If the drive runs more than one belt, replace the set together so the load stays shared evenly.
Dimensions
- Section
- CX
- Length
- 1974mm
Frequently asked questions
- How do I identify this belt on the machine?
- Find the marking printed on the back of the old belt. It should show the profile and length; for this belt that is CX and 1974 mm. Send us that marking if the part number is no longer readable.
- What do I send to get a quote?
- Send the part number PP-CX75,5-EPDM-AS, or the profile and length from the old belt's back marking, by WhatsApp or email. We will confirm the belt and reply with a quote.
- Can you help if the marking is worn off?
- Yes. Measure the belt and note the pulley groove width, then send those details with a photo of the drive. We will work from the profile and length to confirm the right belt.