V-belt Movendis PP-CX70-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX70-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX70-EPDM-AS and any equivalents.
The Movendis PP-CX70-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 1834 mm. When you need to match a drive, the marking on the old belt is the most reliable starting point. Send us that marking and we will confirm the right belt for your application.
The back of a worn belt usually carries the profile, the length and the part number. On this Movendis belt, the marking shows CX and 1834 mm, which correspond to the profile and length. If the old belt is frayed or the print has worn off, check the drive sheaves and any equipment documentation for the same details. A photo of the marking can also help us verify the match.
The CX profile is a classical V-belt cross-section, and the cogged raw edge construction is designed for drives with small pulleys. The 1834 mm length is the datum length for this belt. Because belt markings can be ambiguous, we recommend confirming the profile and length before ordering. If you cannot read the old marking, measure the outside circumference and the top width, or send us the drive details and we will help identify the correct belt.
Dimensions
- Section
- CX
- Length
- 1834mm
Frequently asked questions
- How do I read the marking on my old belt?
- Look for a code printed on the back of the belt. It typically includes the profile and the length. For this Movendis belt, the marking indicates CX and 1834 mm. If the marking is unclear, take a photo and send it to us.
- Can you help if the marking is worn off?
- Yes. Send us the drive make and model, the pulley diameters, and the center distance if possible. We can also work from a photo of the old belt and the drive. We will help confirm the correct profile and length.
- What information do you need for a quote?
- Send the part number PP-CX70-EPDM-AS, or the profile and length from your old belt. If you have the old belt, include a photo of the marking. We will reply with a quote and can suggest an equivalent if needed.