V-belt Movendis PP-CX68,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX68,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX68,5-EPDM-AS and any equivalents.
The Movendis PP-CX68,5-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 1796 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Classical series. This page covers how to match it to the belt you are replacing.
The most reliable match is the marking on the back of the old belt. Read the profile and the part number directly from the belt, not from a parts list or a photo. The profile on this belt is CX and the length is 1796 mm. If the old belt is worn or the marking is gone, measure the outside length and compare it to the 1796 mm figure, and confirm the cross-section is CX.
A cogged raw edge belt can replace a wrapped classical belt of the same profile and length where the drive allows it. Check the sheave grooves for wear and the pulleys for alignment before fitting. If the drive runs more than one belt, replace the full set so the load stays even across the grooves.
Dimensions
- Section
- CX
- Length
- 1796mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. It should show a CX profile and a length that matches 1796 mm. If the marking is unreadable, measure the outside length and check the cross-section against the CX profile.
- What should I send to get a quote?
- Send the part number PP-CX68,5-EPDM-AS, or the profile and length from your old belt, by WhatsApp or email. A photo of the back of the belt helps confirm the marking.
- Can I replace just one belt on a multi-belt drive?
- On a drive that runs a set of belts, replace the full set at the same time. Mixing a new belt with worn belts can cause uneven tension and rapid wear.