V-belt Movendis PP-CX65-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX65-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX65-EPDM-AS and any equivalents.
The Movendis PP-CX65-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 1707 mm. The CX profile and the 1707 mm length are the two dimensions to match against your drive before you order. This belt is part of the PowerPlus EPDM Cogged Raw Edge Classical series.
The CX profile sets the belt's cross-section, so it must match the pulley groove for the belt to seat and transmit load correctly. The 1707 mm length is the datum to check against the old belt or the drive specification. Both figures are stated as given; do not substitute a different profile or length without confirming the drive.
Because this is a cogged raw edge classical belt, the molded cogs on the underside are part of the construction. Read the marking on the back of the old belt and compare it with the part number above. If the marking is worn or unreadable, measure the outside length and confirm the profile before requesting a quote.
Send the part number PP-CX65-EPDM-AS, the profile CX, and the length 1707 mm when you request a quote by WhatsApp or email. If you are replacing more than one belt on the same drive, include the quantity and the position so the set can be matched. Our team can confirm the belt or suggest an equivalent from what we carry.
Dimensions
- Section
- CX
- Length
- 1707mm
Frequently asked questions
- What do the CX profile and 1707 mm length mean for my drive?
- CX is the profile, which must match the pulley groove. 1707 mm is the belt length. Both are stated for this part number and should be checked against your drive before ordering.
- How do I confirm this is the right belt?
- Read the marking on the back of the old belt and compare it with PP-CX65-EPDM-AS. If the marking is not readable, measure the outside length and confirm the profile is CX.
- What should I send to request a quote?
- Send the part number PP-CX65-EPDM-AS, the profile CX, the length 1707 mm, and the quantity. If you are replacing a set, include the number of belts on the drive.