V-belt Movendis PP-CX62-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX62-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX62-EPDM-AS and any equivalents.
This Movendis PP-CX62-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 1631 mm. Cogged classical belts are commonly used on drives where a standard classical belt runs hot or slips, such as industrial fans, pumps, and compressors. To confirm fit, match the CX profile and the 1631 mm length to the belt you are replacing.
The CX profile is a classical cross-section, and the cogged raw edge construction helps the belt run cooler and grip the pulley under load. Because the belt is cogged, it can bend more easily around smaller pulleys than a plain classical belt of the same profile. Check that your drive uses a CX section and that the replacement length is 1631 mm.
The most reliable way to confirm fit is to read the marking on the back of the old belt. If it shows CX and 1631 mm, this Movendis belt matches those two dimensions. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 1631 mm, and check the pulley groove width to confirm the CX profile.
When you request a quote, send the part number PP-CX62-EPDM-AS and the marking from your old belt. If you are replacing more than one belt on the same drive, include the quantity so we can help you keep the set matched.
Dimensions
- Section
- CX
- Length
- 1631mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the old belt for a CX profile marking and a 1631 mm length. If both match, the Movendis PP-CX62-EPDM-AS is the correct size.
- What if the marking on my old belt is worn off?
- Measure the outside length of the old belt and compare it to 1631 mm, and measure the pulley groove to confirm the CX profile. Send those details with your quote request.
- Can I use this belt with other belts on the same drive?
- Yes, but belts on a multi-belt drive should be replaced as a matched set. Include the quantity you need when you request a quote.