V-belt Movendis PP-CX60,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX60,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX60,5-EPDM-AS and any equivalents.
The Movendis PP-CX60,5-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 1593 mm. The CX profile identifies the belt's cross-section, and the 1593 mm length is the datum you match against the drive. This page covers what those two values mean when you are selecting a replacement.
Profile and length are the two dimensions that decide fit. CX sets the cross-section that must sit correctly in the pulley groove, and 1593 mm is the length to compare with the belt you are replacing. If the old belt is worn or the marking is unreadable, measure the drive and confirm both values before ordering.
This is a cogged classical V-belt, so the raw-edge construction is visible along the sides. Cogged classical belts are used where the drive calls for a classical cross-section. The part number PP-CX60,5-EPDM-AS is the reference to quote, and the back of the belt is the first place to check when matching an existing installation.
For a quote, send the part number PP-CX60,5-EPDM-AS, the profile CX, and the length 1593 mm, along with the quantity you need. If you are replacing more than one belt on the same drive, list every position so the set can be confirmed together. We carry the Movendis line and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- CX
- Length
- 1593mm
Frequently asked questions
- What do the CX profile and 1593 mm length tell me?
- CX is the cross-section that must match the pulley groove, and 1593 mm is the belt length to compare against your existing belt or the drive measurement. Both values need to match for the belt to seat and track correctly.
- How do I confirm this is the right replacement?
- Check the marking on the back of the old belt first. If it is worn or missing, measure the drive and confirm the CX profile and 1593 mm length. Send those details with the part number PP-CX60,5-EPDM-AS for a quote.
- What should I include when requesting a quote?
- Send the part number PP-CX60,5-EPDM-AS, the profile CX, the length 1593 mm, and the quantity. If the drive uses multiple belts, list each position so the set can be reviewed together.