V-belt Movendis PP-CX52-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX52-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX52-EPDM-AS and any equivalents.
The Movendis PP-CX52-EPDM-AS is a cogged classical V-belt in the CX profile with a 1377 mm length. Before you fit this belt, inspect the drive and sheaves. A worn sheave or misaligned drive will shorten the life of any new belt.
Check sheave grooves for wear, rust, and burrs. A groove that has worn wider will let the belt sit too deep, so it slips and wears quickly. Clean the grooves and confirm that the sheaves are aligned and tight on their shafts. If the old belt failed early, look for the cause before you install the new one.
This Movendis belt is a cogged classical V-belt in the CX profile, 1377 mm long. The cogged raw edge design is made for drives where a standard wrapped belt runs hot or slips. Confirm that the CX profile and 1377 mm length match the belt you are replacing. If the marking on the old belt is unreadable, measure the outside length and note the profile from the sheave width.
Dimensions
- Section
- CX
- Length
- 1377mm
Frequently asked questions
- What should I check on the drive before fitting the PP-CX52-EPDM-AS?
- Inspect sheave grooves for wear, rust, or burrs, and confirm that the sheaves are aligned and secure. A worn or misaligned drive will reduce belt life. Correct any issues before you install the new belt.
- How do I confirm that this is the correct belt for my drive?
- Check the old belt for a CX profile marking and a 1377 mm length. If the marking is gone, measure the outside length and match the profile to the sheave groove width. The PP-CX52-EPDM-AS is a cogged classical V-belt in the CX profile, 1377 mm long.
- What information do I need to send for a quote?
- Send the part number PP-CX52-EPDM-AS, or the profile and length from the old belt. If you have the old belt, a photo of the back marking helps us confirm the right belt or suggest an equivalent.