V-belt Movendis PP-CX45,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX45,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX45,5-EPDM-AS and any equivalents.
The Movendis PP-CX45,5-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 1212 mm. When you are replacing a belt, the most reliable match is the one already on the drive: read the profile and length from the old belt and compare them to this listing. If the marking is worn or missing, the drive itself and the pulley groove will tell you which profile belongs there.
Start by reading the back of the belt you are removing. Look for the profile letters and the length; a CX profile belt will be marked accordingly, and the length should read 1212 mm. If the old belt is a cogged classical V-belt, this Movendis belt is the same type. If the old belt is smooth, not cogged, you are looking at a different construction and should confirm the profile before ordering.
Measure the outside length of the old belt only if the marking is gone. A belt that has stretched or worn will not measure exactly the same as a new one, so use the printed length as your primary reference. Check the pulley grooves for wear or debris while the belt is off; a worn groove can make a new belt sit too deep and slip.
If you are unsure whether the CX profile and 1212 mm length fit your drive, send a photo of the old belt's marking and the drive arrangement. We carry the Movendis PP-CX45,5-EPDM-AS and can confirm it against your part number. For a quote, send the part number and the quantity you need.
Dimensions
- Section
- CX
- Length
- 1212mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the profile and length printed on the back of the old belt. This belt is CX profile and 1212 mm. If those two values match, it is the same size. If the old belt is not cogged, check whether you need a smooth classical V-belt instead.
- Can I measure the old belt if the marking is unreadable?
- You can measure the outside length, but a used belt may have stretched or worn. Use the measured length as a guide and confirm the profile from the pulley groove width. When in doubt, send us the drive details and we will help identify the correct belt.
- What information do you need for a quote?
- Send the part number PP-CX45,5-EPDM-AS and the quantity. If you are matching a belt already in service, include the profile and length from the old belt or a clear photo of its marking so we can confirm the fit.