V-belt Movendis PP-CX38,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX38,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX38,5-EPDM-AS and any equivalents.
The Movendis PP-CX38,5-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 1034 mm. Cogged classical belts are commonly used on drives where a standard wrapped belt runs hot or slips, such as fans, pumps, compressors and other auxiliary equipment. Confirm fit by matching the CX profile and the 1034 mm length to your drive.
The raw-edge cogged construction helps the belt run cooler and grip the pulley under load. The CX profile is a classical cross-section, so check that your pulley groove is cut for CX and not for a narrow wedge or a different classical size. The 1034 mm length is the datum length to compare against your existing belt or the drive specification.
The simplest way to confirm this belt fits is to read the marking on the back of the belt you are replacing. If it shows CX and 1034 mm, this Movendis belt matches those two dimensions. If the marking is worn or missing, measure the outside length of the old belt and check the pulley profile before ordering.
When you request a quote, send the part number PP-CX38,5-EPDM-AS and the application details. Our team can confirm the CX profile and 1034 mm length against your drive and help you identify the correct belt or a suitable equivalent.
Dimensions
- Section
- CX
- Length
- 1034mm
Frequently asked questions
- How do I confirm that the Movendis PP-CX38,5-EPDM-AS fits my drive?
- Check the marking on the back of the belt you are replacing. It should show the CX profile and a 1034 mm length. If the old belt is unmarked, measure its outside length and verify that the pulley groove is a CX classical profile.
- What does the CX profile mean for my pulley?
- CX is a classical V-belt cross-section. It must match the pulley groove. A narrow wedge belt or another classical profile will not seat correctly, even if the length is close.
- What should I send to get a quote for this belt?
- Send the part number PP-CX38,5-EPDM-AS, the CX profile and the 1034 mm length, along with the equipment type and any drive details you have. We will confirm the belt against your application.