V-belt Movendis PP-CX33,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX33,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX33,5-EPDM-AS and any equivalents.
The Movendis PP-CX33,5-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 907 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Classical series, which we carry for industrial drives. This page helps you match it to the belt you are replacing.
The most reliable way to identify the correct replacement is to read the marking on the back of the old belt. Look for the profile and the length, then compare them with the CX profile and 907 mm length of this Movendis belt. If the marking is worn or unreadable, measure the old belt and note the cross-section and outside length before ordering.
Because this is a cogged classical V-belt, the raw edge and cog design can run on the same sheaves as a standard classical belt of the same profile and length. Check the sheave grooves for wear, and inspect the drive for alignment and tension before fitting the new belt. If the drive uses multiple belts, replace them as a set so the load is shared evenly.
When you request a quote, send the part number PP-CX33,5-EPDM-AS, the profile CX, and the length 907 mm. If you are unsure whether this is the right belt, send a photo of the old belt marking and the sheave dimensions. Our team will confirm the match or suggest an equivalent.
Dimensions
- Section
- CX
- Length
- 907mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt for the profile and length. This belt has a CX profile and a length of 907 mm. If the old belt shows the same profile and length, it is the correct match.
- Can I replace a standard classical V-belt with this cogged belt?
- Yes, if the profile and length match. A cogged classical V-belt with the same CX profile and 907 mm length can replace a standard classical belt of the same size. Inspect the sheaves and alignment before installing.
- What information should I send with my quote request?
- Send the part number PP-CX33,5-EPDM-AS, or the profile CX and length 907 mm. If you have the old belt, include a photo of its marking and the sheave dimensions so we can confirm the match.