V-belt Movendis PP-CX152,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX152,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX152,5-EPDM-AS and any equivalents.
The Movendis PP-CX152,5-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 3930 mm. It is built for drives where a classical cross-section and a cogged raw edge construction are required. Use the profile and length to confirm it matches the belt you are replacing.
To match this belt to the one being replaced, read the marking on the back of the old belt. You are looking for the profile CX and the length 3930 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 3930 mm. A belt with the same profile but a different length will not fit the drive correctly.
This Movendis belt is part of the PowerPlus EPDM Cogged Raw Edge Classical series. The cogged raw edge design is common on drives that run over small pulleys, where a standard wrapped belt may not flex as needed. The CX profile is a classical cross-section, so check that the pulley grooves are cut for a CX belt and are not worn or damaged.
When you request a quote, send the part number PP-CX152,5-EPDM-AS along with the profile and length from your old belt. If you are replacing more than one belt on the same drive, note the quantity and send the full set of markings. Our team can confirm the belt or suggest an equivalent.
Dimensions
- Section
- CX
- Length
- 3930mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the old belt for the CX profile and the length 3930 mm. If the marking is not clear, measure the outside length and compare it to 3930 mm. The profile and length are the key dimensions to match.
- What should I send to get a quote for this belt?
- Send the part number PP-CX152,5-EPDM-AS, the profile CX and the length 3930 mm. If you are replacing a set, include the quantity and the markings from all the belts on the drive.
- Can you help if the old belt marking is unreadable?
- Yes. Send us the drive details and any measurements you can take from the old belt. We can help identify the correct profile and length and confirm whether this Movendis belt is the right match.