V-belt Movendis PP-CX147,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX147,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX147,5-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Classical belt is a cogged classical V-belt in the CX profile, with a length of 3803 mm. It is used on industrial drives where a classical cross-section is required and the cogged raw edge construction helps the belt run cooler and flex over small pulleys. Confirm fit by checking the profile and the length marked on the old belt.
The CX profile is a classical V-belt cross-section. The cogged raw edge design is common on drives that run at higher speeds or use smaller pulleys, because the cogs improve flexibility and heat dissipation. This belt is suited to maintenance and OEM replacement work on industrial machinery where a CX section is specified.
To confirm the right belt, read the marking on the back of the old belt. You should find the profile and the length. Match both to this belt: CX profile and 3803 mm. If the marking is worn or missing, measure the outside length and check the pulley groove width to identify the cross-section.
When you request a quote, send the part number PP-CX147,5-EPDM-AS, the profile and the length, and the drive application. We carry this Movendis belt and can help confirm it is the correct replacement for your drive.
Dimensions
- Section
- CX
- Length
- 3803mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the old belt for the profile and length. This belt is CX profile with a length of 3803 mm. Match those two values. If the marking is not readable, measure the outside length and verify the pulley groove matches the CX cross-section.
- What does the cogged raw edge construction mean for my drive?
- The cogs on the inner side of the belt allow it to flex more easily around small pulleys and help dissipate heat. This can be useful on drives that run at higher speeds or have limited pulley diameters. The belt is still a classical CX profile, so it fits the same pulleys as a standard CX belt.
- What information should I send with my quote request?
- Send the part number PP-CX147,5-EPDM-AS, or the profile CX and length 3803 mm. If you have it, include the drive application and the old belt marking. Our team replies promptly and can help confirm the correct belt for your equipment.