V-belt Movendis PP-CX146-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX146-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX146-EPDM-AS and any equivalents.
The Movendis PP-CX146-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 3764 mm, part of the PowerPlus EPDM Cogged Raw Edge Classical series. Before you fit it, take the time to inspect the drive and the sheaves it runs on. A new belt on worn or misaligned sheaves will not last.
Check each sheave groove for wear, rust, and buildup. A groove that has worn wide lets the belt sit too deep, so it slips and runs hot. Look for a step or ridge where the belt has been riding, and compare groove width across the sheaves in the same drive. Any sheave that is chipped, cracked, or badly worn should be replaced before the new belt goes on.
Check alignment and tension. Misalignment between sheaves is a common cause of edge wear and rollover on a cogged classical V-belt. Use a straightedge across the sheave faces to confirm they line up. Confirm the take-up has enough travel to tension the belt correctly, and check that the driven equipment turns freely by hand before you fit the belt.
The belt is marked CX with a length of 3764 mm, so match the marking on the old belt to the new one. Send the part number PP-CX146-EPDM-AS, or the marking from the back of the belt, and our team will confirm the right belt or suggest an equivalent.
Dimensions
- Section
- CX
- Length
- 3764mm
Frequently asked questions
- What details do you need to quote this belt?
- Send the part number PP-CX146-EPDM-AS, or the profile and length from the back of the old belt. A photo of the marking also helps. We reply by WhatsApp or email.
- What are the profile and length of this belt?
- It is a CX profile cogged classical V-belt with a length of 3764 mm.
- Should I replace more than one belt at a time?
- If the drive uses multiple belts, replace them as a set so they share the load evenly. Mixing a new belt with worn belts on the same drive usually leads to the new belt carrying more than its share.