V-belt Movendis PP-CX139,5-EPDM-AS

MOVENDIS PP-CX139,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX139,5-EPDM-AS and any equivalents.

The Movendis PP-CX139,5-EPDM-AS is a cogged classical V-belt in the CX profile, 3599 mm long, from the PowerPlus EPDM Cogged Raw Edge Classical series. It is a raw edge cogged belt suited to classical V-belt drives where the replacement is specified by profile and length. Before fitting it, inspect the drive so the new belt goes onto a sound, correctly aligned system.

Start with the sheaves. Check groove wear, look for ridges or steps in the groove walls, and confirm the sheaves are clean and free of rust, oil and debris. Worn grooves let a new belt sit too low, so the belt can slip or run hot even when the belt itself is correct. Replace damaged sheaves rather than fitting a new belt into a worn groove.

Check alignment and tension next. Misalignment between sheaves shortens belt life quickly, so verify the sheaves line up before the belt is installed. Confirm the correct tension for the drive, then recheck it after the first run-in period. On multi-belt drives, replace all belts in the set at the same time so they share the load evenly.

When you request a quote, send the part number PP-CX139,5-EPDM-AS and confirm the CX profile and 3599 mm length against the marking on the old belt. If the drive uses more than one belt, state how many you need. We carry Movendis belts and can help confirm the right belt or suggest an equivalent.