V-belt Movendis PP-CX130-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX130-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX130-EPDM-AS and any equivalents.
The Movendis PP-CX130-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 3358 mm. Cogged classical belts are used on drives where a standard wrapped belt may not grip or cool as well, such as compact or high-ratio industrial drives. This page covers how to confirm the belt fits your drive before you request a quote.
To confirm fit, read the marking on the back of the old belt and compare the profile and length to the CX profile and 3358 mm length of the PP-CX130-EPDM-AS. Check the drive sheave groove width and the belt's cross-section: a CX profile belt must sit correctly in the groove. If the old belt is worn, stretched or damaged, measure the drive's center distance and sheave diameters to verify the required length rather than relying on a stretched belt.
Cogged classical V-belts are common on industrial equipment such as fans, pumps, compressors and conveyors. The raw edge and cog design helps the belt run cooler and flex over small pulleys. When replacing, inspect the sheaves for wear, alignment and debris, and check that all belts on a multi-belt drive are replaced as a set so they share the load evenly.
Send the part number PP-CX130-EPDM-AS, the old belt marking, or the drive details by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- CX
- Length
- 3358mm
Frequently asked questions
- How do I confirm the PP-CX130-EPDM-AS fits my drive?
- Compare the profile and length on the old belt to the CX profile and 3358 mm length of this belt. Also check the sheave groove and the drive's center distance and pulley diameters.
- What should I send for a quote?
- Send the part number PP-CX130-EPDM-AS, the marking on the old belt, or the drive details such as sheave diameters and center distance by WhatsApp or email.
- Where are cogged classical V-belts used?
- They are used on industrial drives such as fans, pumps, compressors and conveyors, especially where the belt must flex over small pulleys or run cooler.