V-belt Movendis PP-CX126,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX126,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX126,5-EPDM-AS and any equivalents.
This Movendis PP-CX126,5-EPDM-AS is a cogged classical V-belt in the CX profile, with a length of 3269 mm. To match it to the belt you are replacing, read the marking on the back of the old belt and compare both the profile and the length.
The profile identifies the cross-section, and the length is given in millimeters. A belt marked CX with a 3269 mm length corresponds to this part. If the old belt is worn, faded or cut, measure its outside length and confirm the cross-section before ordering. A belt that is too long or too short will not tension correctly.
This is a cogged raw edge classical belt in the PowerPlus EPDM Cogged Raw Edge Classical series. Cogged construction is common on drives with small pulleys, and raw edge construction is typical of this belt type. When you replace it, inspect the pulleys for wear and alignment, and check the tensioner for free movement. If the drive uses multiple belts, replace them as a set.
We carry the Movendis PP-CX126,5-EPDM-AS. Send the part number, the marking from your old belt, or both the profile and the 3269 mm length by WhatsApp or email, and we will confirm the belt or suggest an equivalent.
Dimensions
- Section
- CX
- Length
- 3269mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. The profile should be CX and the length should be 3269 mm. If the marking is unreadable, measure the outside length and check the cross-section.
- What should I send to request a quote?
- Send the part number PP-CX126,5-EPDM-AS, or the profile and length from your old belt. If you have a photo of the marking, that also helps.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses more than one belt, replace all belts at the same time. Mixed wear can cause uneven tension and premature failure.