V-belt Movendis PP-CX122-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX122-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX122-EPDM-AS and any equivalents.
The Movendis PP-CX122-EPDM-AS is a cogged classical V-belt in CX profile with a length of 3155 mm. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check each sheave groove for wear, rust, burrs or embedded debris. Worn grooves let the belt sit too deep and slip; damaged flanges can cut the sides. Confirm the sheaves are aligned and the shafts turn freely. If the old belt failed early, the sheaves or a seized component are often the cause.
Measure the old belt and compare it with the 3155 mm length of the PP-CX122-EPDM-AS. The CX profile and cogged construction are shown on the belt. When a drive uses multiple belts, replace the full set so all belts share the load. Keep sheaves clean and tension the belt to the drive manufacturer's specification.
For a quote, send the part number PP-CX122-EPDM-AS and the quantity you need. If you are unsure about the profile or length, send a photo of the marking on the back of the old belt and the sheave dimensions. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- CX
- Length
- 3155mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust or burrs, verify alignment, and make sure all components turn freely. Correct any issues before fitting the new belt.
- How do I confirm the PP-CX122-EPDM-AS is the right belt?
- Compare the CX profile and 3155 mm length with the marking on your old belt. If they match, the belt is the correct size.
- What information do I need to send for a quote?
- Send the part number PP-CX122-EPDM-AS and the quantity. If you are unsure, include a photo of the old belt marking and the sheave dimensions.