V-belt Movendis PP-BX99,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX99,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX99,5-EPDM-AS and any equivalents.
The Movendis PP-BX99,5-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 2569 mm. When you are replacing a worn belt, the part number on the old belt is the fastest way to confirm the match. We carry this belt and can help you verify it against the one coming off the drive.
Start by reading the marking on the back of the belt you are removing. Compare the profile and the length to the PP-BX99,5-EPDM-AS: BX profile, 2569 mm. If the old belt is unreadable or missing, measure the outside length and check the cross-section against the BX profile before ordering.
The cogged construction of this classical V-belt is suited to drives where a standard wrapped belt may not fit or run as cool. Because the profile and length are fixed, the correct replacement is the one that matches both. If the drive uses more than one belt, replace the full set so the load is shared evenly.
Send us the part number from the old belt, or the profile and length, by WhatsApp or email. We will confirm the PP-BX99,5-EPDM-AS or suggest an equivalent from the lines we carry. For maintenance and purchasing teams, having the marking and a photo of the drive helps us reply promptly with the right belt.
Dimensions
- Section
- BX
- Length
- 2569mm
Frequently asked questions
- How do I match the PP-BX99,5-EPDM-AS to the belt I am replacing?
- Check the marking on the old belt. The replacement must match the profile and length: BX profile and 2569 mm. If the marking is worn, measure the outside length and confirm the cross-section.
- Can you confirm this belt from a photo of the old one?
- Yes. Send a clear photo of the belt marking and the drive by WhatsApp or email. We will compare it to the PP-BX99,5-EPDM-AS and confirm the match or suggest an equivalent.
- Should I replace all belts on the drive at the same time?
- On a multi-belt drive, replace the full set. Mixing a new belt with worn belts can cause uneven loading. The PP-BX99,5-EPDM-AS is ordered as a single belt, so specify the quantity you need for the set.