V-belt Movendis PP-BX97,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX97,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX97,5-EPDM-AS and any equivalents.
The Movendis PP-BX97,5-EPDM-AS is a cogged classical V-belt in the BX profile, 2519 mm long, from the PowerPlus EPDM Cogged Raw Edge Classical series. Cogged classical belts are commonly used on drives where a standard wrapped belt runs hot or slips, such as fans, pumps, blowers and compressors. Confirm fit by matching the profile and the length to the belt you are replacing.
The raw edge and cogged construction are built for smaller pulleys and higher-speed drives where a wrapped belt may not grip as well. The BX profile sets the cross-section, and 2519 mm sets the outside length. Check both against the old belt: read the marking on the back, or measure the length along the belt's outside.
If the marking is worn off, send the drive details with your quote request. Note the pulley diameters, the center distance, the number of ribs or grooves, and the application. We can confirm the BX profile and 2519 mm length, or suggest an equivalent that fits the same drive.
Inspect the pulleys when you replace the belt. Worn sheaves and misalignment shorten belt life, so check for grooves, rust and proper alignment. On multi-belt drives, replace all belts in the set at the same time so they share the load evenly.
Dimensions
- Section
- BX
- Length
- 2519mm
Frequently asked questions
- How do I confirm the Movendis PP-BX97,5-EPDM-AS fits my drive?
- Match the BX profile and the 2519 mm length to the belt you are replacing. The marking on the back of the old belt is the fastest reference. If it is unreadable, send the pulley diameters and center distance with your quote request and we will help confirm.
- Where is this type of belt used?
- Cogged classical V-belts are common on industrial drives such as fans, pumps, blowers and compressors. The cogged raw edge design is suited to smaller pulleys and higher-speed drives where a wrapped belt may run hot or slip.
- Can I replace just one belt on a multi-belt drive?
- On a multi-belt drive, replace all belts in the set at the same time. Belts that have run together take a set, and mixing a new belt with used ones can make the new belt carry more than its share of the load.