V-belt Movendis PP-BX91-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX91-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX91-EPDM-AS and any equivalents.
The Movendis PP-BX91-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 2353 mm. To match it to the belt being replaced, read the marking on the back of the old belt and confirm the profile and length. The part number identifies this exact belt.
Check that the old belt shows BX and 2353 mm. The BX profile is a classical V-belt section, and the cogged raw edge construction is typical of this series. If the marking is worn or unreadable, measure the outside length and compare it to 2353 mm.
Inspect the drive while the belt is off. Look for worn sheaves, misalignment, or damaged grooves that can shorten belt life. Confirm the replacement belt sits correctly in the pulley grooves and that the drive is tensioned according to the equipment manual.
When you request a quote, send the part number PP-BX91-EPDM-AS, the profile BX, and the length 2353 mm. If you are replacing more than one belt on the same drive, include the quantity and any other belt markings so the set can be matched.
Dimensions
- Section
- BX
- Length
- 2353mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. It should show the profile BX and the length 2353 mm. If it does, the PP-BX91-EPDM-AS is the matching belt.
- What should I send to request a quote?
- Send the part number PP-BX91-EPDM-AS, or the profile BX and length 2353 mm from the old belt. If you need multiple belts for one drive, include the quantity.
- Can I replace just one belt on a multi-belt drive?
- On a drive with several belts, replace the full set at the same time so the load is shared evenly. Provide the quantity when you request a quote.