V-belt Movendis PP-BX86-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX86-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX86-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Classical belt is a cogged classical V-belt in the BX profile, 2226 mm long. It is used on industrial drives where a classical cross-section fits and the cogged raw edge construction suits smaller pulleys.
The BX profile sets the cross-section, and 2226 mm is the datum length. Confirm both against the old belt before ordering: read the marking on the back, which should show the profile and length, and check it against the drive's pulley grooves and the belt's installed position.
Cogged classical V-belts are common on fans, pumps, compressors and other plant drives that use B, BX or similar sections. If the drive runs several belts, replace the full set so the load stays even across the grooves.
To request a quote, send the part number PP-BX86-EPDM-AS, the quantity, and a photo of the old belt's back marking if you have one. If the marking is worn, send the drive make and model and the pulley dimensions, and we can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 2226mm
Frequently asked questions
- How do I confirm that PP-BX86-EPDM-AS is the right belt for my drive?
- Check the old belt's back marking for the BX profile and the 2226 mm length, then compare the cross-section with the pulley grooves. If the marking is unreadable, send the drive details and pulley dimensions with your quote request.
- Can I replace just one belt on a multi-belt drive?
- Where a drive uses a set of belts, replace the full set at the same time so the load is shared evenly across the grooves.
- What should I send to get a quote?
- Send the part number PP-BX86-EPDM-AS and the quantity by WhatsApp or email. A photo of the old belt's back marking helps us confirm the profile and length.