V-belt Movendis PP-BX71-EPDM-AS

MOVENDIS PP-BX71-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX71-EPDM-AS and any equivalents.

The Movendis PP-BX71-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 1845 mm, part of the PowerPlus EPDM Cogged Raw Edge Classical series. We carry it for maintenance and purchasing teams who need a defined replacement belt for a known drive position. Before you fit it, spend a few minutes on the drive itself.

A new belt will not correct a worn sheave. With the drive locked out, check the groove flanks of each sheave for wear, scoring or a polished step where the belt has been running. Worn grooves let the belt sit too deep, so it slips and wears quickly even when the belt is the correct BX profile and 1845 mm length. Check sheave alignment with a straightedge across the faces, and confirm the driven and driving sheaves are tight on their shafts.

Check the rest of the drive as well: bearing play, mounting bolts, and any tensioner or idler. Clean the grooves before fitting the new belt, and never roll a belt over a sheave flange. Tension the belt to the drive manufacturer's specification, then re-check after the first run-in period. If two or more belts run together, replace them as a set so the load is shared evenly.

Have the marking on the back of the old belt ready when you request a quote, or send the part number PP-BX71-EPDM-AS. A photo of the belt and the sheave arrangement helps us confirm the profile and length you need.