V-belt Movendis PP-BX66-EPDM-AS

MOVENDIS PP-BX66-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX66-EPDM-AS and any equivalents.

The Movendis PP-BX66-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 1718 mm. Cogged classical belts are used on drives where a standard wrapped belt may not handle the bending or where some slip is expected. This page covers where the belt is used and how to confirm it fits your drive.

Cogged classical V-belts like this BX-profile belt are common on industrial drives such as fans, pumps, compressors and other equipment that runs at moderate speeds. The raw-edge construction and molded cogs help the belt run cooler and resist cracking on smaller pulleys. The 1718 mm length and BX profile are the key dimensions to match.

To confirm fit, read the marking on the back of the old belt. You should see a profile and a length; if it reads BX and 1718 mm, this belt matches. Also check the pulley grooves for wear and verify that the belt sits correctly in the groove without bottoming out. If the old belt is unmarked, measure the outside length and compare it to 1718 mm.

If you are replacing a belt on a multi-belt drive, replace all belts in the set at the same time. Mixed belts can cause uneven tension and premature failure. Send the part number PP-BX66-EPDM-AS, the profile and the length to our team by WhatsApp or email, and we will confirm the belt or suggest an equivalent.