V-belt Movendis PP-BX56-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX56-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX56-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Classical belt is a cogged classical V-belt in the BX profile, with a length of 1464 mm. Cogged classical belts are common on industrial drives where space is tight and small pulley diameters are used, such as pumps, fans, compressors and other auxiliary equipment. Confirm fit by checking the profile and the length against your drive before ordering.
The BX profile and 1464 mm length are the two dimensions to match. If you are replacing a belt on an existing drive, read the marking on the back of the old belt and compare it with the profile and length above. A belt with the same profile but a different length will not tension correctly, and a different profile will not sit properly in the pulley groove.
For a quote, send the part number PP-BX56-EPDM-AS, or send the profile and length from your old belt if the number is worn off. If you are unsure whether this is the correct belt for your drive, include the pulley diameters and the center distance so the team can help confirm the right belt or suggest an equivalent.
Inspect the drive before installation: check the pulley grooves for wear or debris, confirm the pulleys are aligned, and verify the belt tension after running the drive. On multi-belt drives, replace all belts in the set at the same time so the load is shared evenly.
Dimensions
- Section
- BX
- Length
- 1464mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Match the BX profile and the 1464 mm length to the marking on your old belt or to the drive specifications. If you are unsure, send the pulley diameters and center distance with your quote request and the team can help confirm the right belt or suggest an equivalent.
- What should I send to request a quote?
- Send the part number PP-BX56-EPDM-AS by WhatsApp or email. If you do not have the number, send the profile and length from the old belt, or a photo of the marking on the back of the belt.
- Should I replace all belts on the drive at once?
- On drives that use more than one belt, replace the full set at the same time. Mixing a new belt with worn belts can cause uneven tension and load sharing.