V-belt Movendis PP-BX53-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX53-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX53-EPDM-AS and any equivalents.
The Movendis PP-BX53-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 1388 mm, part of the PowerPlus EPDM Cogged Raw Edge Classical series. When you need to match a belt that is being replaced, this page gives you the exact identification data to compare against the belt in hand.
Start by reading the marking on the back of the old belt. Confirm the profile is BX and the length is 1388 mm. If the existing belt is a cogged classical V-belt with those two values, the PP-BX53-EPDM-AS is the direct size match. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 1388 mm before ordering.
The raw edge cogged construction is suited to drives where a classical V-belt is specified. Because the profile and length are fixed, the main check is that the replacement matches both. Do not substitute a different profile or length; if the drive uses a different cross-section, the belt will not seat correctly in the pulley grooves.
We carry the Movendis PP-BX53-EPDM-AS and can quote it by part number. Send the part number, the profile, and the length from the old belt via WhatsApp or email, and the team will confirm the match or suggest an equivalent if the exact belt is not what your drive requires.
Dimensions
- Section
- BX
- Length
- 1388mm
Frequently asked questions
- How do I confirm the PP-BX53-EPDM-AS is the right replacement?
- Check the old belt for the BX profile and a 1388 mm length. If both match, the PP-BX53-EPDM-AS is the correct size. If the marking is gone, measure the outside length and compare it to 1388 mm.
- What information should I send for a quote?
- Send the part number PP-BX53-EPDM-AS, or the profile and length from the belt being replaced. If you have the old belt, include a photo of the back marking. The team will confirm the match or suggest an equivalent.
- Can I use this belt if the drive calls for a different profile?
- No. The PP-BX53-EPDM-AS is a BX profile belt with a 1388 mm length. A different profile or length will not fit the pulley grooves correctly. Confirm the profile and length before ordering.