V-belt Movendis PP-BX49-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX49-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX49-EPDM-AS and any equivalents.
The Movendis PP-BX49-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 1287 mm. When you are replacing a belt on an existing drive, the most reliable approach is to match the belt that came off it. This page covers what to check so the replacement fits the pulley grooves and the drive center distance.
Start with the marking on the back of the old belt. The profile and the length are the two values that decide fit, so read both directly from the belt rather than from a parts list that may have been updated. Compare them with the BX profile and 1287 mm length of the PP-BX49-EPDM-AS. If the old belt is worn or the marking is gone, measure the top width and the outside length and confirm the profile against the pulley groove.
A cogged belt is used where the drive needs more flexibility or better grip in the grooves than a plain wrapped belt of the same profile. If the drive runs more than one belt, replace the full set at the same time so the belts share the load evenly. Inspect the pulleys while the belts are off: worn grooves, misalignment and damaged sheaves will shorten the life of any new belt.
Dimensions
- Section
- BX
- Length
- 1287mm
Frequently asked questions
- How do I confirm the PP-BX49-EPDM-AS matches the belt I am replacing?
- Read the marking on the back of the old belt. It should show the BX profile and a length matching 1287 mm. If the marking is unreadable, measure the belt and check the profile against the pulley grooves before ordering.
- Can you help me identify the belt from a photo or a partial number?
- Yes. Send a photo of the belt marking, the profile and the measured length by WhatsApp or email, and the team will confirm the correct belt or suggest an equivalent.
- What should I send with a quote request?
- Send the part number PP-BX49-EPDM-AS, the quantity, and the profile and length you need. If you are replacing an existing belt, include the marking from the old belt so the match can be checked.