V-belt Movendis PP-BX35,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX35,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX35,5-EPDM-AS and any equivalents.
The Movendis PP-BX35,5-EPDM-AS is a cogged classical V-belt in the BX profile with a 944 mm length. This raw-edge, EPDM construction is used on industrial drives where a classical cross-section is required and some flexibility around small pulleys helps. Confirm fit by matching the profile and length to the belt you are replacing.
Cogged classical V-belts are common on fans, pumps, compressors and other general industrial equipment that runs a single or multiple belt drive. The raw-edge design and molded cogs help the belt bend without excessive stress, which is useful on drives with smaller pulleys. The EPDM compound is intended for outdoor and indoor environments where heat, ozone and weather exposure are concerns.
To confirm this belt fits your drive, check the marking on the back of the old belt. You need the profile, BX, and the length, 944 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the 944 mm figure. Also inspect the pulley grooves for wear, alignment and debris before installing a new belt.
Dimensions
- Section
- BX
- Length
- 944mm
Frequently asked questions
- How do I confirm the Movendis PP-BX35,5-EPDM-AS will fit my drive?
- Match the profile and length from the old belt's back marking. This belt is BX profile and 944 mm. If the marking is gone, measure the outside length and compare it to 944 mm.
- Where is this type of cogged classical V-belt used?
- It is used on industrial drives that take a classical BX cross-section, such as fans, pumps and compressors. The cogged raw-edge design helps with bending around smaller pulleys.
- What should I send to request a quote for this belt?
- Send the part number PP-BX35,5-EPDM-AS, or the profile and length from your old belt, BX and 944 mm. If you have a photo of the back marking, that also helps confirm the correct belt.