V-belt Movendis PP-BX29,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX29,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX29,5-EPDM-AS and any equivalents.
The Movendis PP-BX29,5-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 791 mm. The profile and length are the two dimensions that determine fit on a classical drive, so starting from the marking on the old belt is the fastest way to confirm this is the right replacement.
The BX profile sits in the classical V-belt family, and the cogged raw edge construction is typical of this PowerPlus EPDM series. The 791 mm length is the datum to match against the drive. If the existing belt is worn or the marking is unreadable, measure the outside length and check the sheave groove width against the BX profile before ordering.
Cogged classical belts are used on drives where the pulley diameters are small enough that a standard wrapped belt would run hot or slip. When replacing, inspect the sheaves for wear and any glazing that would shorten the life of a new belt. If the drive uses more than one belt, replace the full set at the same time so the load stays evenly divided.
MR Industrial Accessories LLC supplies this belt to maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America. Send the part number PP-BX29,5-EPDM-AS by WhatsApp or email and the team will confirm the BX profile and 791 mm length or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 791mm
Frequently asked questions
- What do the profile and length on the PP-BX29,5-EPDM-AS tell me?
- The BX profile defines the cross-section that must match the sheave groove, and 791 mm is the length to match against the drive. Both values come directly from the belt marking.
- How do I confirm this belt fits my drive?
- Read the old belt's back marking and compare the profile and length. If the marking is gone, measure the outside length and check the sheave groove width for the BX profile.
- What should I send to request a quote?
- Send the part number PP-BX29,5-EPDM-AS, the quantity, and the drive or equipment it fits. If you have the old belt, a photo of the back marking helps confirm the match.