V-belt Movendis PP-BX25-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX25-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX25-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Classical belt is a cogged classical V-belt in the BX profile with a length of 677 mm. Cogged classical belts are commonly used on industrial drives where a standard classical V-belt needs to run over smaller pulleys. Confirm fit by matching the profile and the length to your existing belt.
To confirm this belt fits your drive, read the marking on the back of the old belt. The profile should be BX and the length should be 677 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the 677 mm listed here. The cogged raw edge construction is suited to drives with small diameter pulleys where a standard wrapped belt may not flex as easily.
When replacing a belt, inspect the pulleys and sheaves for wear, alignment and debris before installing the new belt. Check that the belt sits correctly in the groove and that the drive is properly tensioned according to your equipment manual. If multiple belts run together, replace them as a set to keep tension even across the drive.
Dimensions
- Section
- BX
- Length
- 677mm
Frequently asked questions
- What does the BX profile mean on this belt?
- BX is the profile of this cogged classical V-belt. It determines how the belt fits into the pulley groove. The length of this belt is 677 mm.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of your old belt. It should show a BX profile and a length of 677 mm. If the marking is not clear, measure the old belt and compare it to these dimensions.
- What should I send to request a quote?
- Send the part number PP-BX25-EPDM-AS, or the profile and length from your old belt, by WhatsApp or email. Our team will confirm the belt or suggest an equivalent.