V-belt Movendis PP-BX130-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX130-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX130-EPDM-AS and any equivalents.
The Movendis PP-BX130-EPDM-AS is a cogged classical V-belt in the BX profile, 3344 mm long. It is built for drives where a raw-edge cogged belt runs over small pulleys or back-idler positions. Confirm the profile and length against the belt you are replacing.
Cogged classical V-belts like this one are common on industrial drives: fans, pumps, compressors, conveyors, and similar equipment. The cogged raw edge is used where the belt must flex around smaller sheaves or run over a back-side idler. This belt is a BX profile, so it fits BX-section pulleys; the 3344 mm length is the datum length to match.
To confirm fit, read the marking on the back of the old belt. You need the profile (BX) and the length (3344 mm). If the old belt is worn or the marking is gone, measure the outside circumference and the top width, then compare with the BX profile. Also check the pulley grooves for wear and the idler condition before ordering.
Send the part number PP-BX130-EPDM-AS, or the profile and length, by WhatsApp or email. The team can confirm the belt or suggest an equivalent. For drives with multiple belts, replace the full set at the same time so the load is shared evenly.
Dimensions
- Section
- BX
- Length
- 3344mm
Frequently asked questions
- What does the BX profile mean for fit?
- BX is the cross-section of the belt. It must match the pulley groove. Check the old belt marking or measure the top width and compare with the BX profile.
- How do I confirm the length?
- The length is 3344 mm. Match that number from the old belt marking. If the marking is missing, measure the outside circumference and compare.
- Can I replace just one belt on a multi-belt drive?
- For drives with more than one belt, replace the full set at the same time. Mixed worn and new belts can cause uneven load and vibration.