V-belt Movendis PP-BX126,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX126,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX126,5-EPDM-AS and any equivalents.
The Movendis PP-BX126,5-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 3255 mm. Before fitting it, inspect the drive and sheaves so the new belt runs true from the start.
Check sheave grooves for wear, burrs, debris or oil. A worn groove lets the belt sit too deep and slip; a damaged groove cuts the belt. Confirm the sheaves are aligned and the shafts turn freely. Replace worn sheaves before installing the new belt.
Confirm the part number on the old belt matches PP-BX126,5-EPDM-AS, and check the BX profile and 3255 mm length against the drive. If the marking is unreadable, send a photo and the drive details for a quote.
On multi-belt drives, fit the full set at once so lengths match and load is shared. Set tension to the drive maker's specification, run the drive briefly, then recheck tension and sheave alignment.
Dimensions
- Section
- BX
- Length
- 3255mm
Frequently asked questions
- What checks should I do before fitting this belt?
- Inspect sheave grooves for wear, burrs, debris and oil, confirm alignment and free rotation, and correct any problems before installing the Movendis PP-BX126,5-EPDM-AS.
- How do I confirm this is the right belt?
- Match the part number PP-BX126,5-EPDM-AS on the old belt and verify the BX profile and 3255 mm length against the drive. If the marking is unreadable, send a photo and drive details with your quote request.
- Should I replace all belts on the drive at once?
- Yes. On multi-belt drives, replace the full set so the belts share load evenly and run as a matched set.