V-belt Movendis PP-BX101,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX101,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX101,5-EPDM-AS and any equivalents.
The Movendis PP-BX101,5-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 2620 mm, part of the PowerPlus EPDM Cogged Raw Edge Classical series. It is the belt to look at when a drive is being serviced and the replacement has to line up with what came off. The most reliable way to match it is to read the marking on the back of the old belt.
Before ordering, pull the old belt and check the marking printed on its back. The profile and the length are what identify the belt: BX and 2620 mm. If the marking is worn or unreadable, measure the belt and note the profile and length so the numbers can be compared against this one.
A cogged classical V-belt runs on the same sheaves as a standard classical belt of the same profile, so the drive does not need to be changed to fit it. Inspect the sheave grooves while the belt is off, since worn or polished grooves will shorten the life of any replacement.
When several belts run on one drive, replace them as a set so the load stays even across the grooves. Send the part number, the belt marking or a photo of the old belt to MR by WhatsApp or email, and the team will confirm the BX profile and 2620 mm length or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 2620mm
Frequently asked questions
- How do I confirm this is the belt I need?
- Read the marking on the back of the belt you are replacing. If it shows the BX profile and a 2620 mm length, this Movendis belt matches those figures. Send the marking or a photo and MR will confirm it.
- Can I replace a standard classical belt with this cogged one?
- Yes, provided the profile and length match. A cogged classical V-belt of the BX profile at 2620 mm fits the same sheave grooves as a standard classical belt of that size.
- What should I send to get a quote?
- Send the part number PP-BX101,5-EPDM-AS, or the marking from the old belt, along with the quantity. If the marking is gone, send the profile and length you measured and the team will help identify the right belt.