V-belt Movendis PP-AX80-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX80-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX80-EPDM-AS and any equivalents.
The Movendis PP-AX80-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 2069 mm. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check sheave grooves for wear, rust, or buildup that can chew a new belt. Confirm the sheaves are aligned and the grooves match the AX profile. Spin the drive by hand and feel for bearing play, binding, or a worn bushing.
Look at the old belt as you remove it. Cracking, glazing, or missing cogs point to heat, slippage, or a misaligned drive. If the drive uses more than one belt, replace the full set so the load stays shared.
Once the sheaves are clean and aligned, fit the PP-AX80-EPDM-AS and set tension to the drive maker's spec. Send the part number and the belt marking for a quote.
Dimensions
- Section
- AX
- Length
- 2069mm
Frequently asked questions
- What is the profile and length of this belt?
- The Movendis PP-AX80-EPDM-AS is an AX profile cogged classical V-belt with a length of 2069 mm.
- Should I replace all belts on the drive at once?
- Yes. If the drive uses multiple belts, replace them as a set so they share the load evenly and wear at the same rate.
- What should I check on the sheaves before fitting a new belt?
- Inspect the grooves for wear, rust, or buildup, confirm the sheaves are aligned, and check bearings and bushings for play or binding.